Finishing Polishing 7147

The car finishing polish is designed to remove holograms, micro-scratches and small defects on all types of paints used in bodywork.

Finishing polish 7147 is a type of polishing compound designed and designed to finish and improve the shine of a surface that has already been polished with a more abrasive polish such as 7146.
This product is intended to remove any remaining micro-scratches or glazes and further finish the surface to a glossy finish.
It is configured as a GLAZE product, as it has excellent efficiency as an anti-halo even on dark colors. Format 250 ml/ 1kg
Polish 7147 is the ideal solution to give the finishing touch to a glossy surface, leaving it with an extremely shiny finish, improving its color and even the clarity of the material. This product is often followed by a protective wax to maintain the shine and deeply protect the surface from environmental contamination, such as our Polish 7148.

APPLICATION:

Make sure the surfaces to be treated are perfectly clean and do not apply in direct sunlight. Shake well before use
Apply a small amount of product either directly to the surface to be treated or to the swab and distribute it evenly over the entire surface
Wait 30-60 seconds and then polish, applying medium pressure at first and then less and less as the surface becomes shiny. It is advisable to use a roto-orbital at 1000-2000 rpm with a soft pad (1010/N) Once the scratches are removed, remove the remaining excess with a cloth. Good results are also obtained without the roto-orbital, but with longer working times.
For a higher gloss, the action of FINISHING POLISH must be followed by that of NANO ULTRAPOLISHING WAX with a microfiber cloth (1011/G or rather 1011/GY).

Download Technical Sheet
Downloads Safety Data Sheet