Marble lineMarble

MARMO KIT — Complete System for Cleaning, Polishing, and Protecting Marble and Fine Stone

MARBLE KIT is the practical and complete solution for caring for marble, granite, and natural stone. Ideal for sinks, kitchen countertops, tables, vanity tops, and decorative surfaces, it restores shine and protection with a simple, structured cycle.

Cleaning, Polishing, and Protection in a Complete Cycle: MARMO KIT restores and maintains the natural beauty of stone surfaces over time, combining effective cleaning, aesthetic uniformity, and functional protection in three simple steps.

Deep Cleaning with CLEAN

• Total Removal of Dirt and Grease

The first step involves using CLEAN, a highly effective universal detergent, essential for removing absorbed dirt, grease, and stubborn residue before any subsequent treatment.

• Directions for use:

1. Dilute approximately 3% (3 capfuls in 1 liter of water)
2. For stubborn dirt, increase the concentration until pure.
3. Apply to stains or the entire surface.
4. Leave to act for a few minutes.
5. Rinse thoroughly.

Evening the Polish with BRILLO ALL’ACQUA

• Homogeneous Gloss and Correction of Dullness.

Once the surface is completely dry, apply BRILLO ALL’ACQUA, a breathable silicone wax that evens out the polish and reduces marks left by abrasives or wear. The result will be a visually more compact marble, with less difference between shiny and matte areas.

• Directions for use:

1. Dampen a cloth with the product
2. Distribute evenly (can also be applied with a brush)
3. After a few minutes, wipe over with a clean cotton cloth until the surface is even and shiny.

Final Protection with DRAI WATER-BASED

• Invisible Water- and Oil-Repellent Waterproofing

As a final step, apply DRAI, a protective treatment that protects the surface from water, oils, and stains, without altering its color or natural appearance. This protection helps keep surfaces cleaner and easier to maintain over time.

• Directions for use:

1. Apply with a cloth or brush, using crossed hands.
2. Let dry completely.
3. If residue or light foaming appears, wipe over with a slightly damp cloth with the same product until the surface is completely even.