Remover compound Polish 7146

The car removal polish is designed to remove imperfections, defects and scrapers from the clear.

Polish remover compound 7146 is a type of abrasive material designed and designed to easily and quickly remove imperfections, scrapers and defects from metal, plastic and paint surfaces. This polish, as the abrasive particles that are used break, allows, not slo to effectively eliminate imperfections, but also to obtain a deep, progressively finer polish.
Format: 250 ml / 1kg
The polish 7146 is configured as the ideal solution to restore the surface of materials with a smooth and uniform finish, giving them a renewed and rejuvenated appearance.

APPLICATION:

Make sure the surfaces to be treated are perfectly clean and do not apply in direct sunlight. Shake well before use. Apply a small amount of product either directly to the surface to be treated or to the pad and spread it evenly over the entire surface.

Wait 10-20 seconds and then polish, applying medium pressure, with a roto-orbital at 1500 rpm, first with a hard pad (1010/B) and then with a medium one reapplying the product.
(1010/A) Once the scratches are removed, remove the remaining excess with a cloth. Good results are also obtained without the roto-orbital, but with longer working times.
For applications on soft surfaces or where rising temperatures could cause problems, or even when using a tampon for the first time, it is advisable to spray a little’ of water on the surface, without overdoing it.
For a higher gloss, the action of REMOVER COMPOUND POLISH must be followed by that of FINISHING POLISH with a soft pad (1010/N) and then by NANO ULTRAPOLISHING WAX with a microfiber cloth (1011/G or rather 1011/GY).

Download Technical Sheet

Downloads Security Card