Make sure that the surface to work on is perfectly dry and clean;
Mix well the product;
Using clean tools, take the quantity to be used from the can, adding 1-2 grams of hardener paste for every 100 grams of product;
ATTENTION: using too much hardener could change the final result.
Mix the quantity indicated mixing well the two components;
Apply the Jolly Mastic Metallic Effect on the surface to be glued or plastered,
Hardening times may vary depending on the temperature, they will shorten with temperatures above 25°C and/or lengthen with lower temperatures;
Do not put the catalysed and/or unused mastic back into the can to avoid its deterioration;
Close the jar after use, in order to prevent the product from hardening on contact with the air.
To avoid a change of the final color effect, do not exceed more than 2% in the use of the hardener.